1. This forum is obsolete and read-only. Feel free to contact us at support.keenswh.com

Inter-Grid Communication Only Works on the Same Grid

Discussion in 'Programming (In-game)' started by Exonto, May 22, 2020.

Thread Status:
This last post in this thread was made more than 31 days old.
  1. Exonto

    Exonto Trainee Engineer

    Hi all,

    Recently got into scripting for SE and I've been trying to get igc working between two different grids with antennas but I've been unsuccessful. I've been using the example scripts provided by the mdk github page as well as my own which work just fine if both PBs are on the same ship but do not work when communicating between two separate ships.

    The example script: https://github.com/malware-dev/MDK-SE/wiki/IGC-Example-2-Toggle-Lights

    I've triple checked that both antennas broadcast at max range (the ships are right next to each other so this shouldn't matter) and have the "Enable broadcast" checked and are not toggled off. In case it matters, I'm on a creative world and I'm using the "Red Ship" map to do all my testing.

    Anyways, after looking around on the interwebs for a while I haven't made any progress. What am I missing?

  2. Wicorel

    Wicorel Senior Engineer

    I wrote and tested that example and it communicated.

    Some more things to check:

    • Are both antennas on?
    • Does ownership/relationship allow messages (can you access the remote grid through through the close grid's antenna system?)

    I have a world on the workshop that I used to test and demo the scripts.

    Note: I only check these forums about once a week at best. I'm on the Keen discord daily.
Thread Status:
This last post in this thread was made more than 31 days old.